Nokia 6108 - Page 33

22
■ Chinese input
instructions
Switching between input
methods
You can switch between the
available input methods by:
• pressing repeatedly, until
the indicator of the desired input
method is displayed on the
upper left corner of the display;
• pressing and holding to
switch quickly between Number
and other input methods;
• pressing Options, as when
writing messages, and then
choosing the desired input
method from the options list.
Pinyin input method
The pinyin symbols are printed on
the number keys. You only need to
press a key once regardless of the
symbol’s position on the number
key, and the phone will make
logical combinations of the pinyin
symbols.
The phone can also predict the next
Chinese character if it makes a two-
character phrase with the first one.
When the predicted character is
inputted, the prediction ends and
you need to input the pinyin
symbols for the next Chinese
character.
Using Pinyin input method
1. Press the number key once for
each pinyin symbol you want to
input (use "v" for "u");
Insert a spe-
cial character
•Press .
• Press repeatedly to
get commonly used
punctuation marks.
• Press and hold .
• Press , then press
repeatedly if necessary to
get commonly used punc-
tuation marks.
Delete • Press Clear repeatedly.
Press and hold Clear to
delete more quickly.
• Press Options, and select
Clear text.
• Press Clear repeatedly.
Press and hold Clear to
delete more quickly.
• Press Options, and select
Clear text.
Traditional English
input
Predictive English
input
RH-4_FCC_2003-4-16.fm Page 22 Friday, April 18, 2003 4:34 PM