27
English
Options, and select View
details.
3. To send the message, press
Options and select Send.
4. Enter the recipient’s phone
number or get it from your
phone book.
Press OK to send the message.
Note: When sending
messages via the SMS
network service, your
phone may display the
words Message sent. This is
an indication that the
message has been sent by your
phone to the message centre
number programmed into your
phone. This is not an indication that
the message has been received at
the intended destination. For more
details about SMS services, check
with your service provider.
Options for sending a message
After you have written a message,
press Options and select Sending
options.
• To send a message to several
recipients, select Send to many.
When you have sent the
message to everyone you want
to send it to, press Done.
• To send a message to a
predefined distribution list,
select Send to list. Note that
when you choose this option, the
phone will send each member of
the list a separate message.
To define and edit distribution
lists, see “Distribution lists”, 29.
• To send a message using a
message profile, select Sending
profile and then the desired
message profile.
To define a message profile, see
”Message settings” on page 39.
Read and reply to a message
When you have received a message,
the indicator and the number of
new messages followed by
messages received are shown.
The blinking indicates that the
message memory is full. Before you
can receive new messages, delete
some of your old messages.
The text messages function uses
shared memory. Refer to ”Shared
memory” on page 0.
1. Press Show to view the new
message, or press Exit to view it
later.
Reading the message later:
Press Menu, and select
Messages, Text messages and
Inbox.
2. If more than one message has
been received, select the one that
you want to read. An unread
message is indicated by .
3. While reading or viewing the
message, press Options.
RH-4_FCC_2003-4-16.fm Page 27 Friday, April 18, 2003 4:34 PM
To Next Page
Loading...
