[ 44 ]
1
1 While editing a message, press Options.
2 Scroll to Predictive text. The language list displays.
3 On the language list, scroll to Prediction off and press OK. Your
phone is now in traditional (multitap) mode.
4 You can also use multitap on the pound key (#) to go to traditional
text in a message.
Add words to the dictionary
1 If the ? character appears after the word, press Spell, or at any time
while you are editing, press Options, scroll to Insert word, then press
Select.
2 Enter the word using traditional text input, and press OK. If the
dictionary is full, the new word replaces the oldest added word.
Change the dictionary language
You can change the dictionary language while you are editing a message:
1 While editing a message, press Options.
2 Scroll to Predictive text, then press Select.
3 Scroll to a language, then press OK. The selected language is active.
Enter words with predictive text input
1 Press each key only once for each letter of the word. For example, to
write hello, press 4 > 3 > 5 > 5 > 6. The characters that you enter
appear underlined. The word changes after each keystroke, so only
check the word after you press all the appropriate keys.
For example, to write Nokia when the English dictionary is selected, press
for N, for o, for k, for i and for a. :
2 When you finish the word, check to make sure that the word is correct.