[ 69 ]
Infrared
9
9) Infrared
You can set up the phone to receive data through its infrared (IR) port. To
use an IR connection, the device with which you want to establish a
connection must be IrDA compliant. You can send or receive data such as
business cards and calendar notes to or from a compatible phone or data
device (for example, a computer) via the IR port of your phone.
Caution: Do not point the IR (infrared) beam at anyone's eye or allow it
to interfere with other IR devices. This device is a Class 1 Laser
product.
Note: The phone must be switched on to use this function. Do not
switch on the phone when the use of a wireless phone is
prohibited or when it may cause interference or danger.
• SENDING AND RECEIVING DATA VIA INFRARED
Ensure that the IR ports of the sending and receiving devices are pointing
at each other and that there are no obstructions between the devices. The
preferable distance between the two devices in an infrared connection is
one metre at most.
To activate the IR port of your phone to receive data via IR, press Menu
and select Infrared. The user of the sending phone selects the desired IR
function to start data transfer.
If data transfer is not started within two minutes after the activation of
the IR port, the connection is cancelled and has to be started again.
• INFRARED CONNECTION INDICATOR
When is shown continuously, the IR connection is activated and your
phone is ready to send or receive data via its IR port.
When blinks, your phone is trying to connect to the other device or
a connection has been lost.
To Next Page
Loading...
