[ 70 ]
10
10) Bluetooth
You can set up the phone to send and receive data through Bluetooth. In
the Bluetooth menu, you can manage connections and define settings.
Since Bluetooth devices communicate using radio waves, your phone and
the other Bluetooth device do not need to be in line of sight. The two
devices only need to be within a maximum of 10 meters of each other,
although the connection can be subject to interference from obstructions
such as walls or other electronic devices.
In some countries, there may be restrictions on using Bluetooth devices.
Check with your local authorities.
Note:The phone must be switched on to use this function. Do not
switch on the phone when the use of a wireless phone is
prohibited or when it may cause interference or danger.
• ACTIVATING AND DEACTIVATING BLUETOOTH
Press Menu and select Bluetooth. When Bluetooth is displayed, select On
or Off. The phone displays a notification that Bluetooth is activated or
deactivated. When Bluetooth is on, the indicator ? is displayed.
Using Bluetooth consumes the battery and the phone's operating time
will be reduced. Be careful not to let it run in the background when
performing other operations with your phone.
Bluetooth device name
When the user activates the Bluetooth module for the first time, the
phone asks for the Bluetooth device name of your phone by showing Enter
name:, the user can accept the default name or change it. The name can
be up to 15 characters. After the user has accepted the name, Name saved
is shown. Bluetooth device names help you to distinguish one Bluetooth
device or accessory from another.
To Next Page
Loading...
