[ 82 ]
12
network. You obtain the access point name from your network
operator or service provider.
• IP address - Key in the address, press for a period, and press OK.
You obtain the IP address from your network operator or service
provider.
• Authentication type - Select Secure or Normal.
• Login type - Select Manual or Automatic. If you select Manual when
the GPRS connection is set to Always online, the Always online
connection will be disabled.
• User name - Key in the user name and press OK.
• Password - Key in the password and press OK.
• MAKING A CONNECTION TO A WAP SERVICE
First, make sure that the service settings of the WAP service you want to
use are activated. To activate the settings:
• Press Menu, select Services and Settings. Select Active service
settings and scroll to the set you want to activate and press Activate.
Second, make a connection to the WAP service. There are three ways to
connect:
• Open the homepage of the WAP service:
• Press Menu, select Services and Home.
Tip:To quickly open the homepage of a WAP service:
•In standby mode, press and hold .OR
• Select a bookmark of the WAP service: Press Menu, select
Services, Bookmarks, and select a bookmark. If the bookmark does
not work with the current active service settings, activate
another set of service settings and try again.
• Key in the address of the WAP service: Press Menu, select Services and
then Go to address. Key in the address of the WAP service, press
To Next Page
Loading...
