Nokia 6680 - Sending Data via Bluetooth

Connectivity
86
Copyright © 2005 Nokia. All rights reserved.
Note: The actual time invoiced for calls by your
service provider may vary, depending on network
features, rounding off for billing, and so forth.
To end a connection, scroll to a connection, and select
Options > Disconnect.
To close all currently open connections, select Options >
Disconnect all.
View data connection details
Options in Conn. mgr. main view when there are
one or more connections are Details, Disconnect,
Disconnect all, Help, and Exit.
To view the details of a connection, scroll to a connection,
and select Options > Details.
Name—The name of the Internet access point (IAP) in use,
or the modem connection name if the connection is a
dial-up connection.
Bearer—The type of data connection: Data call, High sp.
GSM, or Packet data.
Status—The current status of the connection: Connecting,
Conn.(inact.), Conn.(active), On hold, Disconnctng., or
Disconnected.
Received—The amount of data, in bytes, received to the
phone.
Sent—The amount of data, in bytes, sent from the phone.
Duration—The length of time that the connection has been
open.
Speed—The current speed of both sending and receiving
data in kilobytes per second.
Name—Access point name used.
Dial-up—The dial-up number used.
Shared (not shown if the connection is not shared)—The
number of applications using the same connection.
Remote synchronisation
Press , and select Connect. > Sync. Sync enables you to
synchronise your calendar and contacts with various
calendar and address book applications on a compatible
computer or on the Internet.
The synchronisation application uses SyncML technology
for synchronisation. For information on SyncML
compatibility, contact the supplier of the calendar or
address book application you want to synchronise your
phone data with.
You may receive syncronisation settings in a special text
message. See ‘Data and settings’, p. 52.