Nokia 6680 - Voice Commands; Add a Voice Command to an Application; Application Manager

Tools
99
Copyright © 2005 Nokia. All rights reserved.
Select Headset, Loopset or Bluetooth handsfree, and the
following options are available:
Default profile—To set the profile that you want activated
each time you connect a certain enhancement to your
phone. See ‘Set tones’, p. 13.
Automatic answer—To set the phone to answer an
incoming call automatically after 5 seconds. If the Ringing
type is set to Beep once or Silent, automatic answer is
disabled.
Voice commands
You can use voice commands to control your phone. You
record voice commands in the same way as voice tags. See
‘Add a voice tag’, p. 31.
Press , and select Tools > Voice com.
Add a voice command to an application
You can have only one voice command per application.
1 Select the application to which you want to add a voice
command.
To add a new application to the list, select Options >
New application.
2 Select Options > Add voice command. See ‘Add a
voice tag’, p. 31.
Application manager
Press , and select Tools > Manager. You can install two
types of applications and software to your phone:
• J2ME™ applications based on Java™ technology with
the extension JAD or JAR ( ).
• Other applications and software suitable for the
Symbian operating system ( ). The installation files
have the SIS extension. Only install software
specifically designed for your Nokia 6680 device.
Installation files may be transferred to your phone from a
compatible computer, downloaded during browsing, or
sent to you in a multimedia message, as an e-mail
attachment, or using a Bluetooth connection. You can use
Nokia Application Installer in Nokia PC Suite to install an
application to your phone or a memory card. If you use
Microsoft Windows Explorer to transfer a file, save the file
to a memory card (local disk).