Nokia 6680 - Device Manager; Server Profile Settings

Connectivity
88
Copyright © 2005 Nokia. All rights reserved.
To cancel synchronisation before it finishes, press
Cancel.
2 You are notified when the synchronisation is
complete. After synchronisation is complete, select
Options > View log to open a log file showing the
synchronisation status (Complete or Incomplete) and
how many calendar or contact entries have been
added, updated, deleted, or discarded (not
synchronised) in the phone or on the server.
Device manager
Press , and select Connect. > Dev. mgr.. You may
receive server profiles and different configuration settings
from your network operator, service provider, or company
information management department. These
configuration settings may include access point settings
for data connections and other settings used by different
applications in your phone.
To connect to a server and receive configuration settings
for your phone, select Start configuration.
To allow or deny receiving of configuration settings from
a service provider, select Enable config. or Disable config..
Server profile settings
Contact your service provider for the correct settings.
Server name—Enter a name for the configuration server.
Server ID—Enter the unique ID to identify the configuration
server.
Server password—Enter a password to identify your phone
to the server.
Session mode— Select Bluetooth or Web.
Access point—Select an access point to be used when
connecting to the server.
Host address—Enter the URL address of the server.
Port—Enter the port number of the server.
User name and Password—Enter your user name and
password.
Allow configuration—To receive configuration settings
from the server, select Yes.
Auto-accept all reqs.—If you want the phone to ask for
confirmation before accepting a configuration from the
server, select No.