33
1-touch dialing — to dial the names and phone numbers assigned to the speed-
dialing keys 2 - 9 by pressing and holding the corresponding number key
Call waiting — to have the network notify you of an incoming call while you have
a call in progress (network service). See “Call waiting” on page 19.
Call duration display — to display a counter during each call
Summary after call — to briefly display the approximate duration and cost
(network service) of the call after each call
Send my caller ID — to display your phone number to the person you are calling
(network service). To use the setting agreed upon with your service provider, select
Set by network.
Answ. if fold opened — to answer an incoming call by opening the fold
■ Phone settings
Select Menu > Settings > Phone and from the following:
Language settings — to set the display language of your phone, select Phone
language. Automatic selects the language according to the information on the
SIM card.
Memory status — to view the amount of used and available phone memory
Automatic keyguard — to set the keypad of your phone to lock automatically after
a preset time delay when the phone is in the standby mode and no function of the
phone has been used. Select On, and set the time.
Security keyguard — to set the phone to ask for the security code when you unlock
the keyguard. Enter the security code, and select On.
Voice recognition — to set up voice commands on your phone. Voice commands
allow you to select which functions you want to activate with your voice. Voice
recog. training allows the phone software to learn the variations in your speaking
voice.
Offline mode query — the phone asks whether to use the offline profile every time
when switched on. With the offline profile all radio connections are switched off.
The offline profile should be used in areas sensitive to radio emissions.
Phone updates — to update phone software or check the current software
Help text activation — to allow additional information about features to appear
Start-up tone — the phone plays a tone when switched on
Fold close handling — to select whether to return to standby mode or keep all
applications open when the fold is closed