Command Hierarchies
Page 146 7210 SAS M, T, X, R6, R12, Mxp, S, Sx Interface Configuration Guide
Ethernet Commands
Port Ethernet QoS commands
NOTE: Not all the commands are available on all the platforms. See the CLI description for more infor-
mation.
config
— [no] port {port-id}
— ethernet
— access
— accounting-policy acct-policy-id
—no accounting-policy
— [no] collect-stats
— egress
—[no] sap-qos-marking {enable|disable}
— scheduler-mode [fc-based | sap-based]
—no scheduler-mode
— qos policy-id
—no qos
— uplink
— accounting-policy acct-policy-id
—no accounting-policy
— [no] collect-stats
— qos policy-id
—no qos
— queue-policy name
—no queue-policy
— egress-rate sub-rate [
max-burst size-in-kbits]
—no egress-rate
— egress-scheduler-policy port-scheduler-policy-name )
— no egress-scheduler-policy
— enable-dei
—no enable-dei
— network
— accounting-policy policy-id
—no accounting-policy
— [no] collect-stats
— qos policy-id
—no qos
— queue-policy name
—no queue-policy
Port Ethernet Commands
config
— [no] port {port-id}
— ethernet
— autonegotiate [limited]
— [no] autonegotiate
— connection-type connection-type (supported only on 7210 SAS-Mxp devices)
— down-on-internal-error
—no down-on-internal-error
— duplex {full | half}
— encap-type {dot1q | null | qinq}