1. Make sure that no application is currently accessing the microSD
memory card.
2. Remove the back cover of the device.
3. Press the microSD card slightly in to release the lock, and remove it.
Charge the battery
Check the model number of any charger before use with this device. This
device is intended for use when supplied with power from the AC-3 and
AC-4 charger.
The exact charger model number may vary depending on the type of plug.
For example, the model numbers for the AC-3 charger can be, among others,
AC-3C, AC-3U, AC-3X.
Warning: Use only batteries, chargers, and enhancements approved
by Nokia for use with this particular model. The use of any other types may
invalidate any approval or warranty, and may be dangerous.
For availability of approved enhancements, please check with your dealer.
When you disconnect the power cord of any enhancement, grasp and pull
the plug, not the cord.
1. Connect the charger to a wall socket.
2. Connect the lead from the charger to the
charger connector of your phone.
If the battery is completely discharged, it
may take a few minutes before the charging
indicator appears on the display or before
any calls can be made.
The charging time depends on the charger
used. Charging a BL-4CT battery with the
AC-4 charger takes about 1 hour 30 minutes
while the phone is in the standby mode.
Get started
13
Get started
To Next Page
Loading...
Need help?
General
