Get started
13
1. Remove the back cover of the phone.
Swing the microSD memory card holder
open (1)
2. Insert the card into the memory card
holder with the gold-colored contact
area facing up (2).
3. Close the card holder (3 and 4) and slide
the back cover back in place.
■ Charge the battery
Check the model number of any charger before use with this device. This
device is intended for use when supplied with power from an AC-3 or AC-4
charger.
Warning: Use only batteries, chargers, and enhancements approved
by Nokia for use with this particular model. The use of any other
types may invalidate any approval or warranty, and may be
dangerous.
For availability of approved enhancements, please check with your dealer.
When you disconnect the power cord of any enhancement, grasp and pull the
plug, not the cord.
1. Connect the charger to a wall socket.
2. Connect the lead from the charger to the
socket at the side of your phone.
A CA-44 charging adapter can be used
with older charger models.
If the battery is completely discharged, it may
take a few minutes before the charging
indicator appears on the display or before any calls can be made.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
