Settings
62
Language settings — to set the display language of your phone, select
Phone language. Automatic selects the language according to the
information on the SIM card. To select the USIM card language,
select SIM language. To set a language for the voice playback, select
Voice playback lang.. See “Enhanced voice dialing,” p. 22 and Voice
commands in “My shortcuts,” p. 54.
Memory status — to view the amount of used and available phone
memory
Automatic keyguard — to set the keypad of your phone to lock
automatically after a preset time delay when the phone is in the
standby mode and no function of the phone has been used. Select On,
and set the time.
Security keyguard — to set the phone to ask for the security code
when you unlock the keyguard. Enter the security code, and select
On.
Welcome note — to write the note that is shown when the phone is
switched on
Network mode — to select dual mode (UMTS and GSM), UMTS, or
GSM. You cannot access this option during an active call.
Operator selection > Automatic — to set the phone to automatically
select one of the cellular networks available in your area. With
Manual you can select a network that has a roaming agreement with
your service provider.
Help text activation — to select whether the phone shows help texts
Start-up tone > On— the phone plays a tone when it is switched on
Flight query > On— the phone asks every time when it is switched on
whether the flight profile shall be used. With flight profile all radio
connections are switched off. The flight profile should be used in
areas sensitive to radio emissions.
Confirm SIM actions — See “SIM services,” p. 89.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
