Nokia 8800 - 3 Call Functions; Make a Call; Speed Dialing; Answer or Reject a Call

Call functions
9
English
3. Call functions
■ Make a call
1. Enter the phone number,
including the area code. To delete
an incorrect character, select
Clear.
For international calls, press *
twice for the international prefix
(the + character replaces the
international access code) and
then enter the country code, the
area code without the leading 0,
if necessary, and the phone
number.
2. To call the number, press the call
key.
3. To end the call or to cancel the
call attempt, press the end key, or
close the slide.
Make a call using names
To search for a name or phone
number that you have saved in
Contacts, see "Search for a contact",
page 28. Press the call key to call the
number.
Last number redialing
To access the list of up to 20
numbers you last called or
attempted to call, press the call key
once in standby mode. To call the
number, select a number or name,
and press the call key.
Speed dialing
Assign a phone number to one of the
speed-dialing keys, 2 to 9. See
"Speed dialing", page 32. Call the
number in either of the following
ways:
• Press a speed-dialing key and
then press the call key.
•If Speed dialling is set to On,
press and hold a speed-dialing
key until the call is started. See
Speed dialling in "Call", page 41.
■ Answer or reject a call
To answer an incoming call, press
the call key, or open the slide. To end
the call, press the end key, or close
the slide.
To reject an incoming call when the
slide is open, press the end key.
To mute the ringing tone, select
Silence. Then either answer or reject
the call.
Tip: If the Divert if busy
function is activated to divert
the calls, for example, to your
voice mailbox, rejecting an
incoming call will also divert
the call. See "Call", page 41.
9237415_8800_2_en_zh.fm Page 9 Tuesday, April 19, 2005 10:26 AM