Nokia 8800 - Access Codes; Security Code; PIN Codes, Module PIN, and Signing PIN; PUK Codes

• Synchronization of data from
another phone without having a
SIM card inserted, see "Data
transfer with a compatible
device", page 40.
• Plug and play online service to
get the configuration settings,
see "Switch the phone on and
off", page 3, and "Configuration",
page 43.
■ Access codes
Security code
The security code (5 to 10 digits)
helps to protect your phone against
unauthorized use. The preset code is
12345. To change the code, and to
set the phone to request the code,
see "Security", page 44.
PIN codes, module PIN, and
signing PIN
The PIN (personal identification
number) code and the UPIN
(universal personal identification
number) code (4 to 8 digits) help to
protect your SIM card against
unauthorized use. See "Security",
page 44.
The PIN2 code (4 to 8 digits) may be
supplied with the SIM card and is
required for some functions.
The module PIN is required to access
the information in the security
module. See "Security module",
page 65.
The signing PIN is required for the
digital signature. See "Digital
signature", page 66.
PUK codes
The PUK (personal unblocking key)
code and the UPUK (universal
personal unblocking key) code
(8 digits) is required to change a
blocked PIN code and UPIN code,
respectively. The PUK2 code (8 digits)
is required to change a blocked PIN2
code.
Barring password
The barring password (4 digits) is
required when using the Call
barring service. See "Security",
page 44.
Wallet code
The wallet code (4 to 10 digits) is
required to access the wallet
services. For further information, see
"Wallet", page 53.
x
9237415_8800_2_en_zh.fm Page -2 Tuesday, April 19, 2005 10:26 AM