Call functions
10
If a compatible headset supplied
with the headset key is connected to
the phone, to answer and end a call,
press the headset key.
Call waiting
To answer the waiting call during an
active call, press the call key. The
first call is put on hold. To end the
active call, press the end key.
To activate the Call waiting
function, see "Call", page 41.
■ Options during a call
Many of the options that you can
use during a call are network
services. For availability, contact
your network operator or service
provider.
For some of the following options,
select Options during a call:
Mute or Unmute, Contacts, Menu,
Record, Lock keypad, Audio
enhancing, Loudspeaker or
Handset, and the network services
Hold or Unhold, Answer and Reject,
New call, Send DTMF (to send tone
strings), Swap (to switch between
the active call and the call on hold),
Transfer (to connect a call on hold
to an active call and disconnect
yourself), Conference (to make a
conference call that allows up to five
persons to take part in a conference
call), Add to conference, Private
call (to discuss privately in a
conference call), End call, End all
calls.
Note: Do not hold the
device near your ear when
the loudspeaker is in use,
because the volume may be
extremely loud.
9237415_8800_2_en_zh.fm Page 10 Tuesday, April 19, 2005 10:26 AM
To Next Page
Loading...
