Menu functions
27
English
• Configuration settings >
Configuration. Only the
configurations that support
multimedia messaging are
shown. Select a service provider,
Default, or Personal config. for
multimedia messaging.
Select Account and select a
multimedia messaging service
account contained in the active
configuration settings.
• Allow adverts — to receive or
reject advertisements. This
setting is not shown if Allow
multimedia reception is set to
No.
E-mail
The settings affect the sending,
receiving and viewing of e-mail.
You may receive the configuration
settings for the e-mail application as
a configuration message. See
"Configuration settings service",
page xi. You can also enter the
settings manually. See
"Configuration", page 43.
To activate the settings for the
e-mail application, select Menu >
Messages > Message settings >
E-mail messages and from the
following options:
• Configuration — Select the set
that you would like to activate.
• Account — Select an account
provided by the service provider.
• My name. — Enter your name or
nickname.
• E-mail address — Enter e-mail
address.
• Include signature — You can
define a signature that is
automatically added to the end
of your e-mail when you write
your message.
• Reply-to address — Enter the
e-mail address to which you
want the replies to be sent.
• SMTP user name — Enter the
name that you want to use for
outgoing mail.
• SMTP password — Enter the
password that you want to use
for outgoing mail.
• Display terminal window —
Select Yes to perform manual
user authentication for intranet
connections.
• Incoming server type — Select
either POP3 or IMAP4 depending
on the type of e-mail system that
you are using. If both types are
supported, select IMAP4.
9237415_8800_2_en_zh.fm Page 27 Tuesday, April 19, 2005 10:26 AM