After Sales
Technical Documentation
RAE/RAK–1N
Quick Guide
Page 17
Original, 08/96
Telephone
Contacts
Tel
Fax SMS Internet Notes Calendar System Extras
Tel
is used for making and receiving voice calls and adjusting the
Telephone settings.
Figure 8. Telephone Directory
Selection Frame
Making a Call From The Directory
Select the contact you want to call by moving the selection frame over the
contacts name and press
Call . If the contact has only one phone number,
the number is called directly.
If the contact has more than one phone number, a pop–up box opens,
listing the phone numbers. Choose the correct number from the list and
press
Call .
Making a Call Manually
Press
Enter number.
Key in a phone number and press Call.
Answering Calls
You can answer a call either from the phone interface or from the
communicator interface. To answer a call from the communicator
interface:
Activate the Telephone application by pressing the
Tel.
application button.
Press Answer.
Note If you answer a call from the phone interface, but later choose to switch to the
communicator interface, note that the audio is off (to turn audio on, press Audio On).
If you do not want to answer the call, press End call.