After Sales
Technical Documentation
RAE/RAK–1N
Quick Guide
Page 28
Original, 08/96
System
ContactsFax SMS Internet Notes Calendar System Extras
Tel
The main view shows a list of applications that can be launched; scroll to
an application and press
Select.
Figure 23. System – main view
The following applications require connection to a PC and the supplied
Nokia connect programme to be running.
File transfer
Install / Remove software
Backup / Restore
Import / Export contacts
The software requires Microsoft Windows 3.1 or later and requires
connection to an available serial or infrared (IrDA compatible) port.
Security
Press
Select and then Settings to define the locking codes, passwords etc.
If the time–out locking feature has already been activated the Lock System
command in the Security main view will lock the communicator
immediately.
User Data
This shows your own
contact
sheet which is used in fax cover pages.
Fax Modem
The communicator can function as a normal 9600 bps fax–modem and be
utilised by any stand alone PC. To change the communicator to a
fax–modem, press
Activate. Press Disable to disconnect the mode.
You can connect the communicator to a PC either by infrared or cable
connection ( PC connectivity software not needed). Press
Settings and
then Change.
When the communicator is used as a fax–modem, other communication
features are disabled but the communicator interface remains functional.
To Next Page
Loading...
