Quick guide
10
3 Select a recipient and press Select.
4 Press Send. If your message is longer than 160 characters, it will be sent as
several short messages, provided that your network support this function.
To read a received message
There are two ways to read a received message:
1 When you receive a note informing you that you have received a message,
press View. To read the message later, press Cancel. Or,
2 Select the Received messages folder and press Open. Select the message
and press Open.
Internet
Internet access requires that you have obtained an Internet access point from
an Internet service provider and configured the Internet settings correctly.
Contact your dealer for details.
1 Press the Internet application button on the communicator keyboard.
2 Choose one of the applications and press Select.
The connection to the Internet is established via a data call. This requires that
data calls are supported by the network you are using and that this service is
activated for your SIM card. Contact your service provider for details.
To close the connection to the Internet, press Hang up in the Internet main
view.
Mail
Mail enables you to send and receive e-mail. Mail is compliant with the
Internet standards SMTP, IMAP4, POP3, MIME1 and MIME2. Before using this
application, be sure to enter the correct Mail settings.
To send mail
1 Press Write mail and write the message.
2 Press Recipient. The Mail directory opens.
3 Select a contact and press Select. If the contact has several mail
addresses, choose the address from the pop-up box and press Select.
4 The Mail envelope opens. In the Mail envelope you can check the sending
information and add more recipients by pressing Add recipient or entering
addresses manually.
5 Press Send.
To read mail
The Mail application main view shows the Remote mailbox. The Remote
mailbox, which receives all your mail, is located on a remote computer.
1 Move the selection frame over the Remote mailbox and press Connect. The
To Next Page
Loading...
Need help?
General
