Nokia A032 Getting Started Guide

Setting up and testing
23
Enabling WEP
If, on the other hand, you do need to enable
WEP security:
1 Click
Enable in the WEP field.
The screen will automatically scroll down to
the WEP Settings section:
2 Enter one or more shared WEP keys in the
Key Value fields.
3 Click the appropriate radio button to specify
the
Active Key.
4 Click
Enter.
Notes:
• If you don’t specify any shared WEP keys,
WEP will actually be reset to
Off when you
restart.
• Key values are not automatically deleted
from the WEP Settings fields if you switch
WEP off in Learn mode. This makes it easy
to switch WEP on again without having to
re-enter your shared WEP keys – next time
you’re in Learn mode, just click
Enter before
you restart the Nokia A032 (you don’t even
need to click
Enable in the WEP field at the
top of the Learn mode screen).
Note: Only do this if
you know that the
wireless station uses
shared WEP keys. If it
doesn’t, you can
ignore this section.

Nokia A032 Specifications

General

Brand	Nokia
Model	A032
Category	Wireless Access Point
Language	English