Select Menu > Settings and Connectivity > Bluetooth.
1 Open the Paired devices tab.
2 Select Options > New paired device. Devices that are within range are displayed.
3 Select the device.
4 Enter the passcode on both devices.
indicates a paired device in the device search view.
Connect to an accessory after pairing
Select Options > Connect to audio device. Some audio accessories connect
automatically to your device after pairing.
Set a device as authorised
Select Set as authorised. Connections between your device and the authorised device
can be made without your knowledge. Use this only for your own devices, such as your
compatible headset or PC, or devices that belong to someone you trust.
indicates
authorised devices in the paired devices view.
Cancel a pairing with a device
Select Options > Delete.
Cancel all pairings
Select Options > Delete all.
Receive data using Bluetooth connectivity
When you receive data using Bluetooth connectivity, a tone sounds, and the device asks
you if you want to accept the message. If you accept,
is displayed, and you can find
an informative message about the data in the Inbox folder in Messaging. Messages
received using Bluetooth connectivity are indicated with
.
Block devices
You can prevent devices from establishing a Bluetooth connection to your device.
Select Menu > Settings and Connectivity > Bluetooth.
Block a device
On the Paired devices tab, go to a device you want to block, and select Options >
Block.
Unblock a device
On the Blocked devices tab, go to a device, and select Options > Delete.
Connectivity 105
To Next Page
Loading...
