Connection settings — To define the network destination used for the network
connection, select Network connection. To select the connection manually each time
Video centre opens a network connection, select Always ask.
To set GPRS connection on or off, select Confirm GPRS usage.
To set roaming on or off, select Confirm roaming.
Parental control — Set an age limit to videos. The required password is the same as
the device lock code. The factory setting for the lock code is 12345. In video-on-demand
services, videos which have the same or a higher age limit than you have set, are hidden.
Preferred memory — Select whether downloaded videos are saved in the device
memory or on a compatible memory card.
Thumbnails — Select whether to download and view thumbnail images in video feeds.
Web browser
With the web browser, you can view hypertext markup language (HTML) pages on the
web as originally designed (network service). You can also browse web pages that are
designed specifically for mobile devices, and use extensible hypertext markup language
(XHTML), or the wireless markup language (WML).
To browse the web, you need to have an internet access point defined in your device.
Browse the web
With the Browser application, you can browse web pages.
Select Menu > Internet > Web.
Go to a web page
From the toolbar, select
Go to web address, and enter a web address.
Exit full screen mode to see control icons
Select the arrow icon in the bottom right corner. By default, the browser goes back to
full screen mode after a few seconds.
Some web pages may contain material, such as video clips, that requires a large amount
of memory to view. If your device runs out of memory while loading such a web page,
insert a memory card. Otherwise, the video clips are not displayed.
Disable graphics to save memory and speed up downloading
Select Options > Settings > Page > Load content > Text only.
Web browser 75
To Next Page
Loading...
