Nokia CK-200 - Installation Using Power Cable CA-153 P and Direct Input Cable CA-161

Installation
42
Installation using the power cable CA-153P and direct
input cable CA-161
In this setup, the junction box is connected to the car radio with the
power cable CA-153P and the direct input cable CA-161, and the car
radio speakers are used for calls.
1. Connect the wires of the power cable CA-153P to the car as follows:
• The black wire to the vehicle ground.
• The red wire to the permanent 12 V. Always connect the supplied
2 A fuse to this line, close to the source.
CK-200
CA-134