Installation
29
Setup option 3
You can use the external loudspeaker SP-3 and the power cable PCU-4
as follows (if supplied with the car kit):
1. Connect the respective wires of the power cable PCU-4 to the car
battery and ignition sense (if available). Connect the car radio mute
signal (if available) to the car radio. Plug the connector into the
hands-free unit.
2. For phone calls, connect the loudspeaker output of the hands-free
unit to the loudspeaker SP-3.
3. Connect the stereo music output of the hands-free unit (a standard
3.5-mm stereo connector) to the AUX input of the car radio. Use an
appropriate cable specific to your car radio (this cable is not supplied
with the car kit).
To Next Page
Loading...
