Installation
30
4. To charge a compatible Nokia mobile device through the car kit,
connect one end of the connectivity cable CA-113CU to the hands-
free unit and the other end to the 2.0-mm (0.08 inch) charging
connector of the mobile device.
To play music from a mobile music player that has a standard 3.5-
mm (0.14 inch) audio connector, plug the 3.5-mm (0.14 inch)
connector of the connectivity cable to the music device.
After you have made all the connections described above, connect the
external input device CU-10 and the microphone MP-2 to the respective
connectors on the hands-free unit.
■ Install the car kit in a vehicle
This section describes how to install the car kit parts in a vehicle. The
parts are explained in “Parts,” p. 12.
Example of appropriate installation
To Next Page
Loading...
