47
Camera
■ Record videos
1. To activate the main camera, open the lens cover. If the camera is in the image
mode, change to video mode. In active toolbar, select Switch to video mode.
indicates video mode.
To activate the secondary camera, select Options > Use secondary camera.
2. Press the camera key to start recording. With the secondary camera, press the
scroll key for recording. is shown and a tone sounds, indicating that
recording has started.
To zoom in or out of the subject using the main camera, press the volume keys,
or, using the secondary camera, scroll down or up.
3. To stop recording, select Stop. The video clip is automatically saved to the
Video clips folder in the Gallery. See ‘Gallery,’ p. 39. The maximum length of
the video clip depends on the available memory.
To pause recording at any time, select Pause. Video recording automatically stops
if recording is set to pause and there are no keypresses within a minute. Select
Continue to resume recording.
To make lighting and colour adjustments before recording a video, select from the
active toolbar settings. See ‘Active toolbar,’ p. 44 and ‘Scenes,’ p. 46.
After recording a video
After you record a video clip, select the following from the active toolbar
(available only if Show captured video is set to On. See ‘Video settings,’ p. 48):
• To immediately play the video clip you just recorded, select Play .
• To send the video clip using a multimedia message, e-mail, or Bluetooth
connectivity, press the call key, or select Send ( ). You may not be able to
send video clips saved in the .mp4 file format in a multimedia message.
• To upload the video clip to a compatible online album, select Sign in for Share
online ().
• To open the Gallery, select Go to Gallery ().
• If you do not want to keep the video, select Delete ().
■ Camera settings
There are two kinds of settings for the still image camera: active toolbar settings
and main settings. To use active toolbar settings, see ‘Active toolbar,’ p. 44. The
To Next Page
Loading...
