73
Connectivity
indicates a PTT connection.
indicates that PTT is set to do not disturb (DND).
Exit PTT
Select Options > Exit. Log out from PTT after exiting application? is displayed. To
log out, select Yes. To keep PTT active in the background, select No.
Make a one-to-one call
Warning: Do not hold the device near your ear when the loudspeaker is in use,
because the volume may be extremely loud.
1. Select Options > PTT contacts > Contacts, scroll to the contact you want to
talk to, and press the call key.
2. When the connection has been established, to talk to the other participant,
press and hold the call key while you talk.
3. To end the PTT call, select Disconnect, or, if there are several PTT calls, select
Options > Disconnect.
Make a PTT group call
To call a group, select Options > PTT contacts > Contacts > Options > Talk to
many, mark the contacts you want to call, and select OK.
PTT sessions
PTT sessions are displayed as call bubbles in the PTT display, giving information
about the status of the PTT sessions:
Wait — shown when you press and hold the call key and somebody else is still
speaking in the PTT session
Talk — shown when you press and hold the call key and get the permission to
speak
Send a callback request
To send a callback request from Contacts, scroll to a contact, and select Options >
Send callback request.
■ Connection manager
In the connection manager, you can identify the status of data connections, view
details on the amount of data sent and received, and end unused connections.
To Next Page
Loading...
