Switch on your device
1. To switch the device on, press and hold the power key.
2. If the device asks for a PIN code (or UPIN code, if you have a USIM card), lock code or security code, enter the code, and select
OK.
A UPIN code and USIM card are used only if you are in a UMTS/3G network. Contact your service provider for more information
about network type. See "UMTS (3G)," p. 49.
3. To switch the device off, press and hold the power key.
Tip: When you switch the device on, it may recognize the SIM card provider and configure the correct text message,
multimedia message, and GPRS settings automatically. If not, contact your service provider for the correct settings, or
use the Sett. wizard application.
The device can be used without the network dependant phone functions when a SIM card is not inserted or when the Offline
profile is selected.
Enter first settings
When you power on the device for the first time, or when you switch on the device after the battery has been removed for a
longer period, your device asks for a city, time, and date. You can change these settings later in Clock.
1. Select the city in which you are located from the list and OK. To browse for a city, start to type the name of the city, or scroll
to a city. It is important to select the correct city, because scheduled calendar entries that you create can change if the new
city is located on a different time zone.
2. Set the time, and select OK.
3. Set the date, and select OK.
Keys and parts
1 — Power key
2 — Navi™ scroll key (hereinafter the scroll key)
3 — Right selection key
4 — End key
5 — Own key
6 — E-mail key
7 — Backspace key
8 — Enter key
9 — Chr key
10 — Shift key
11 — Ctrl key
12 — Spacebar
G e t s t a r t e d
© 2007 Nokia. All rights reserved. 10
To Next Page
Loading...
