To be notified of a new incoming call while you have a
call in progress, select Call > Call waiting >
Options > Activate. To check if the function is active
on the network, select Options > Check status.
To select whether net calls alert or not, select Call >
Internet call alert. You are notified of missed net calls
with a notification.
To set the default call type, select Call > Default call
type and select Voice call if you make a GSM calls, or
Internet call if you make net calls.
To send a text message automatically to the person
who is calling you informing why you cannot answer
the incoming call, select Call > Reject call with
SMS > Yes. To set the text for the message, select
Call > Message text.
To set off the contact search on the home screen, select
Call > Contact search > Off.
Network settings
Select Menu > Tools > Settings > Phone >
Network.
To select the network mode, select Network mode
and Dual mode, UMTS, or GSM. In the dual mode, the
device switches automatically between networks.
Tip: UMTS enables faster data transfer, but may
increase the demand on battery power and
reduce the battery life. In regions close to both
GSM and UMTS networks, selecting Dual mode
may cause constant jumping between the two
networks, which also increases the demand on
battery power.
To select the operator, select Operator selection and
Manual to choose from available networks, or
Automatic to have the device select the network
automatically.
To set the device to indicate when it is used in Micro
Cellular Network (MCN), select Cell info display >
On.
Connection settings
Select Menu > Tools > Settings > Connection.
Select from the following:
• Bluetooth — Edit the Bluetooth settings.
See "Send
and receive data with Bluetooth", p. 103.
• USB — Edit the data cable settings.
See "Data
cable", p. 102.
• Access points — Set up new or edit existing access
points. Some or all access points may be preset for
your device by your service provider, and you may
not be able to create, edit, or remove them.
• Packet data — Determine when packet data
connections are used, and enter the access point if
you use your device as a modem for a computer.
• Wireless LAN — Determine if the device displays an
indicator when a WLAN is available, and how often
the device searches for networks.
• Data call — Set the time-out period after which data
call connections automatically end.
• SIP settings — View or create session initiation
protocol (SIP) profiles.
• Internet tel. — Define settings for net calls.
125
Settings
To Next Page
Loading...
Need help?
General
Weight and Dimensions
