To enable three-dimensional (3-D) sound effects for
ringing tones, select 3-D ringing tone effects > On.
Not all ringing tones support 3–D effects.
To change the 3–D effect that is applied to the ringing
tone, select Sound trajectory and the desired effect.
To modify the 3–D effect, select from the following:
• Trajectory speed — Select the speed at which
sound moves from one direction to another. This
setting is not available for all effects.
• Reverberation — Select the desired effect to adjust
the amount of echo.
To listen to the ringing tone with the 3–D effect, select
Options > Play tone.
To adjust the volume of the ringing tone, select
Menu > Ctrl. panel > Profiles and Options >
Personalise > Ringing volume.
102
Personalisation
To Next Page
Loading...
