Turn on Bluetooth and pair with headset
1. At the Home screen, select Menu.
2. Select Ctrl. panel.
3. Select Connectivity.
4. Select Bluetooth.
5. Press the Navigation key right once to scroll to the
Paired Devices screen.
6. Select Options.
7. Select New paired device.
8. Select Yes to turn on Bluetooth, if necessary. Your phone
will automatically search for devices to pair with.
9. Select your headset.
10. Enter the Passcode, if necessary, and select OK.
EmERgEnCy dIalIng
While all phones are equipped with 911 emergency calling, this
phone may or may not permit its location to be
approximated during a 911 call.*
* Availability of this feature depends on upgrades to the (a) wireless network and (b) 911
calling system that are required to be installed by the local 911 response agency or public
safety answering point (PSAP); these upgrades may not be available everywhere within
our wireless coverage area or your roaming area. This approximation of the phone’s
location and the transmittal of location information are subject to emergency situations,
transmission limits, network problems/limitations, interconnecting carrier problems, your
phone, buildings/tunnels, signal strength and atmospheric/topographical conditions, and
may be curtailed, interrupted, dropped or refused. The phone’s approximate location is
transmitted to the local 911 response agency or PSAP while the call is in progress; this
approximation is intended solely to aid the PSAP in dispatching emergency assistance or
to limit the search area for emergency services personnel. You should not rely solely on a
phone for essential communications (such as a medical or other emergency). Please see
T-Mobile’s Terms and Conditions and Privacy Policy for additional service restrictions and
details.
To Next Page
Loading...
