the old code and then the new code
twice. A minimum of 4 characters is
required, and numbers, symbols, and
upper and lower case letters can be
used.
Keep the new code secret and in a safe
place separate from your device. If you
forget the lock code and your device is
locked, your device will require service.
Additional charges may apply, and all
the personal data in your device may be
deleted. For more information, contact
a Nokia Care point or your device dealer.
You can also lock the device remotely by
sending a text message to the device.
Lock your device remotely
1 To enable remote locking, select
Menu > Ctrl. panel > Settings and
General > Security > Phone and
SIM card > Remote phone
locking > Enabled.
2 Enter the text message content. It
can be 5-20 characters, and both
upper and lower case letters can be
used.
3 Enter the same text again to verify
it.
4 Enter the lock code.
5 To lock the device remotely, write
the predefined text, and send it to
your device as a text message. To
unlock your device, you need the
lock code.
Memory card security
Select Menu > Office > File mgr..
You can protect a memory card with a
password to prevent unauthorized
access.
To set a password, select Options >
Memory card password > Set. The
password can be up to 8 characters long
and is case-sensitive. The password is
stored in your device. You do not need
to enter it again while you use the
memory card on the same device. If you
use the memory card on another device,
you are asked for the password. Not all
memory cards support password
protection.
To remove the memory card password,
select Options > Memory card
password > Remove. When you
remove the password, the data on the
memory card is not protected against
unauthorized use.
50 Security and data management
www.nokia.com/support
Cyan
To Next Page
Loading...
