To use a high-speed data connection,
select High speed packet access >
Enabled.
WLAN settings
Select Menu > Ctrl. panel > Settings
and Connection > Wireless LAN.
To have an indicator displayed when
there is a wireless LAN (WLAN) available
in your current location, select Show
WLAN availability > Yes.
To select the interval for your device to
scan for available WLANs, and to update
the indicator, select Scan for
networks. This setting is not available
unless you select Show WLAN
availability > Yes.
To set the device to test the internet
capability of the selected WLAN
automatically, to ask for permission
every time, or to never perform the
connectivity test, select Internet
connectivity test > Run
automatically, Ask every time, or
Never run. If you select Run
automatically or allow the test to be
performed when the device asks for it,
and the connectivity test is performed
successfully, the access point is saved to
internet destinations.
To check the unique media access
control (MAC) address that identifies
your device, enter *#62209526# in the
home screen. The MAC address is
displayed.
WLAN security settings
Select Menu > Ctrl. panel > Settings
and Connection > Destinations >
Access point, and follow the
instructions on the display.
To edit a wireless LAN (WLAN) access
point, open one of the access point
groups, and select an access point
marked with
.
To enter the settings for the selected
security mode, select WLAN security
settings.
Session initiation protocol (SIP)
settings
Select Menu > Ctrl. panel > Settings
and Connection > SIP settings.
64 Settings
www.nokia.com/support
Cyan
To Next Page
Loading...
