17 FastMile 5G Gateway User Guide Issue 1.0
Ethernet WAN
FastMile 5G Gateway has dynamic WAN switching, which is an
automatic backup method to access the internet if 4G/LTE and 5G
fails. If 5G and 4G/LTE signals are weak, you may notice slower
internet speeds.
You can connect the ethernet cable to the WAN port in the bottom
of the device.
If the FastMile 5G Gateway successfully switches the signal to
Ethernet WAN and successfully receives a WAN IP address, the
Center LED turns blue.
If the Center LED is blinking red, there is no ethernet WAN
connection.
To Next Page
Loading...
