42 FastMile 5G Gateway User Guide Issue 1.0
Add a policy name
1. Check the Access Control checkbox.
2. Click the plus sign (+) to add a
policy.
A separate panel displays for
configuring the policy name, IP
address of the device, and dates
and times for the policy.
3. Enter a New Policy Name.
Configure the parental control
policy
1. Enter a new MAC Address or
choose a MAC address from the
list.
The MAC address identifies the
device.
Click Add.
2. Enter a new IPv4 address for the
device or choose an IPv4 address from the list.
Click Add.
3. Select the check boxes for the Days of the week for which the
policy applies.
4. Enter the times for the policy to be in effect.
5. Click Save changes to activate the policy.
6. Click Close.
To Next Page
Loading...
