Nokia WiFi Beacon 6 Product Guide
3FE-47429-AAAA-TCZZA Issue: 01
This chapter provides the steps to replace a Beacon 6 (HA-0336G-A).
7.2 General
The steps listed in this chapter describe mounting and cabling for a Beacon 6 (HA-
0336G-A).
7.3 Prerequisites
You need the following items before beginning the installation:
• all required cables
7.4 Recommended tools
You need the following tools for replacing the Beacon 6 (HA-0336G-A):
• RJ-45 cable
• paper clip
Replace a Beacon 6 (HA-0336G-A)
7.5 Safety information
Read the following safety information before replacing the unit.
Danger 1 — Hazardous electrical voltages and currents can cause
serious physical harm or death. Always use insulated tools and
follow proper safety precautions when connecting or disconnecting
power circuits.
To Next Page
Loading...
