Make calls
24
3 The device plays a synthesized voice tag for the
recognized contact in the selected device language,
and displays the name and number. After a time-out
of 1.5 seconds, the device dials the number.
If the recognized contact was not correct, select Next
to view a list of other matches, or Quit to cancel voice
dialing.
If several numbers are saved under the name, the device
selects the default number, if it has been set. Otherwise
the device selects the first available number of the
following: Mobile, Mobile (home), Mobile (business),
Telephone, Tel. (home), and Tel. (business).
Video calls
When you make a video call, you can see a real-time,
two-way video between you and the recipient of the call.
The live video image, or video image captured by the
camera in your device is shown to the video call recipient.
To be able to make a video call, you must have a USIM
card and be in the coverage of a UMTS network. For
availability of and subscription to video call services,
contact your network operator or service provider. A video
call can only be made between two parties. The video call
can be made to a compatible mobile phone or an ISDN
client. Video calls cannot be made while another voice,
video, or data call is active.
Icons:
You are not receiving video (the recipient is not
sending video or the network is not transmitting it).
You have denied video sending from your device. To
send a still image instead, see ‘Call settings’, p. 97.
1 To start a video call, enter the phone number in the
standby mode, or select Contacts and a contact.
2 Select Options > Video call.
Starting a video call may take a while. Waiting for image
is shown. If the call is not successful (for example, video
calls are not supported by the network, or the receiving
device is not compatible) you are asked if you want to try
a normal call or send a message instead.
The video call is active when you see two video images, and
hear the sound through the loudspeaker. The call recipient
may deny video sending ( ), in which case you hear the
sound and may see a still image or a grey background
graphic.
To change between showing video or hearing only sound,
select Enable/Disable > Sending video, Sending audio or
Sending audio & video.
To zoom your own image, select Zoom in or Zoom out. The
zoom indicator is shown on the top of the display.
To switch the places of the sent video images on the
display, select Change image order.
To Next Page
Loading...
Need help?
General
