Camera and Gallery
38
Video modes
Normal ( )(default)—Use this mode in all conditions.
Night ( )—Use this mode in low light conditions.
Image modes
Automatic ( ) (default)—Use this mode in all
conditions.
User defined ( )—Use this mode to create a
personalized scene with your own flash, white balance,
and color tone settings.
Portrait ( )—Use this mode to take portrait pictures,
such as head shots and sitting poses.
Landscape ( )—Use this mode when you take pictures
of objects that are further away.
Night ( )—Use this mode in low light conditions.
Sport ( )—Use this mode to take pictures of fast
moving objects. When you use this mode, the resolution
of the images is reduced from 1600x1200 to 800x600.
See Image quality, 36.
When taking pictures, the default mode is Automatic. If
you select the User defined mode, however, it is set as the
default mode.
To make your own mode suitable for a certain
environment, select User defined mode. In the user mode
you can adjust Based on mode, Flash, White balance,
Colour tone, and Reset user mode options. To copy the
settings of another mode, select Based on mode and the
desired mode.
Edit images
To edit the pictures after taking them, or the ones already
saved in Gallery, select Options > Edit.
Select Apply effect to crop and rotate the image; adjust
the brightness, color, contrast, compression, and
resolution; and add effects, text, clip art, or a frame to the
picture.
To crop an image, select Options > Apply effect > Crop.
Select Manual to crop the image size manually, or select a
predefined aspect ratio from the list. If you select Manual,
a cross appears on the upper left corner of the image. To
move the cross, and select the area to be cropped, move
the scroll key. Select Set. Another cross appears on the
lower right corner. Select again the area to be cropped, and
select Crop.
To add clip art to an image, select Options > Apply
effect > Clip-art. Select the item you want to add from
the list, and press . To move, rotate, and change the size
of the item, select Options > Move, Resize, or Rotate.
To add text to an image, select Options > Apply effect >
Text. Enter the text, and select OK. To edit the text, select
Options > Move, Resize, Rotate, or Select colour.
To Next Page
Loading...
Need help?
General
