Connectivity
14
Connectivity
Wireless Keyboard
To set up a Nokia Wireless Keyboard or other compatible
wireless keyboard supporting the Bluetooth Human
Interface Devices (HID) profile for use with your device, use
the Wireless Keyboard application. The keyboard enables
you to enter text in comfort, using the full QWERTY layout,
for text messages, e-mail, and calendar entries.
Note: This application is only available in a limited
number of languages.
1 Activate Bluetooth connectivity on your device.
2 Switch on the keyboard.
3 Press , and select Connect. > Wireless Keyboard
4 Select Options > Find keyboards to start searching for
devices with Bluetooth connectivity.
5 Select the keyboard from the list.
6 To pair the keyboard with your device, enter a passcode
of your choice (1 to 9 digits) on the device, enter the
same passcode on your keyboard within 30 seconds,
and press the enter key on the keyboard. You do not
need to write down the passcode because you can use
a different passcode if you need to pair the keyboard
with your device again.
To enter the digits of the passcode, you may need to
press the Fn key first.
7 If you are asked for a keyboard layout, select it from a
list on your device.
8 When the name of the keyboard appears, its status
changes to Keyboard connected, and the green
indicator of your keyboard blinks slowly, the keyboard
is ready for use.
For details on the operation and maintenance of your
keyboard, see its user guide.
To Next Page
Loading...
