Training and Vendor Development
CMO Operations & Logistics
Multimedia Creation & Support CONFIDENTIAL
05.Nov.2007
15
Service Manual N93 RM-55 / RM-153 Copyright © 2006 NOKIA Corporation. All rights reserved.
Approved 7.0
MGR
Page (50)
31. Unscrew both torx size 6 screws and discard them.
32. Always use new screws when reassemble.
33. Carefully separate the parts, mind the switch of the Flip
PWB Module.
34. Peel off the Flip Frame Adhesive Tape with tweezers.
35. Ensure that no residues remain.
36. Gently peel up the glued Flip PWB Module with the SS-93.