Nokia ONT BGW320-505 - Page 37

• Do not place any heat source directly above the top cover or below the bottom cover
2
Review the connection locations, as shown in Figure 4-1, “BGW320-505 ONT connections”
(p. 36)
.
3
Connect the Ethernet cables to the ONT and GE ports; see Figure 4-1, “BGW320-505 ONT
connections” (p. 37)
for the location of these ports.
4
Connect a telephone to the RJ-14 POTS port.
Contact your service provider for details, especially if you have an alarm system.
Figure 4-1 BGW320-505 ONT connections
Install or replace a BGW320-505 indoor ONT
Install a BGW320-505 indoor ONT
BGW320-505
June 2022
Issue 3 37
© 2022 Nokia. Nokia Confidential Information
Use subject to agreed restrictions on disclosure and use.
3FE-47753-AAAA-TCZZA