RM-11
Disassembly CC Technical Documentation
Page 4 ©2005 Nokia Corporation Confidential Issue 2 09/2005
10. Open the snaps on both sides of the Display shield
and remove the shield.
Note: Be careful not to damage the shield.
11. Remove the LCD Module by holding the UI module
in one hand while loosening the LCD frame a little at
the same time at one side. Press the LCD module gently
from the same side you are loosening until the LCD
Module detaches.
Note: Be careful not to damage the sensitive parts. Do
not press the LCD Module too hard.
12. Remove the UI board from the LCD frame.
Note: Be careful not to damage the LCD frame.
13. Remove the Power Key.
Power Key removal. 14. Lift the Vibra to remove it.
Step-by-Step Disassembly Instructions (Model 3205)
To Next Page
Loading...
