Nokia TA-1057 - User Manual

1. Insert the SIM and memory
card
1.Open the SIM card tray: push the tray opener pin
in the tray hole and slide the tray out.
2. Put the nano-SIM in slot 1 on the tray with the
contact area face down. If you have a second SIM,
put it in slot 2.
3. Open the memory card tray: push the tray opener
pin in the tray hole and slide the tray out.
4. Put the memory card in the memory card slot.
5. Slide the trays back in their slots.
Use only original nano-SIM cards. Use of incompati-
ble SIM cards may damage the card or the device,
and may corrupt data stored on the card.
Use only compatible memory cards approved for
use with this device. Incompatible cards may dam-
age the card and the device and corrupt data stored
on the card.
Important: Do not remove the memory card
when an app is using it. Doing so may damage the
memory card and the device and corrupt data
stored on the card.
Both SIM cards are available at the same time when
the device is not being used, but while one SIM card
is active, for example, making a call, the other may
be unavailable.
Note: On dual SIM capable devices, both SIM1
and SIM2 slots support 4G networks. However, if
your SIM1 and SIM2 are both LTE SIM cards, the pri-
mary SIM supports 4G/3G/2G networks, while the
secondary SIM can only support 3G/2G. For more
information on your SIM cards, contact your service
provider.
2. Charge the battery and switch
the phone on
Plug a compatible charger into a wall outlet, and
connect the cable to your phone. Your phone sup-
ports the USB micro-B cable. You can also charge
your phone from a computer with a USB cable, but
it may take a longer time.
If the battery is completely discharged, it may take
several minutes before the charging indicator is dis-
played.
To switch your phone on, press and hold the power
key until the phone vibrates. The phone guides you
through the setup.
For an online user guide and troubleshooting help,
go to
PKES255001A V1.0
xxxxxxxxxx
Get Started
Nokia x
TA-1057/TA-1063 EN-EU
Main camera
Headset connector
Microphone
SIM cards
MicroSD card
USB connector
Microphone
Loudspeaker
Front camera
Earpiece
Volume keys
Power/Lock key

Nokia TA-1057 Specifications

General

Network Technology	GSM / HSPA / LTE
SIM	Single SIM (Nano-SIM) or Dual SIM (Nano-SIM, dual stand-by)
Display Type	IPS LCD
Display Size	5.5 inches
Operating System	Android 7.1.1 (Nougat), upgradable to Android 9.0 (Pie)
Memory Internal	16GB 2GB RAM, 32GB 3GB RAM
Memory Card Slot	microSDXC (dedicated slot)
Loudspeaker	Yes
3.5mm jack	Yes
GPS	Yes, with A-GPS, GLONASS, BDS
Radio	FM radio
Battery	Li-Ion 3000 mAh, non-removable
Main Camera	13 MP, f/2.0, AF
Selfie Camera	8 MP, f/2.0
WLAN	Wi-Fi 802.11 a/b/g/n, dual-band, Wi-Fi Direct, hotspot
Bluetooth	4.1, A2DP
NFC	Yes
USB	microUSB 2.0, USB On-The-Go
Sensors	Fingerprint, accelerometer

Summary

Insert the SIM and memory card

Charge the battery and switch the phone on

Product and Safety Information

Network and Connectivity

Information on supported networks and 4G/LTE service provider compatibility.

Maximum Transmit Power

Details maximum transmit power levels for various network technologies like GSM, WCDMA, and LTE.

Battery and Charging Guidance

Instructions on charging the internal battery and compatible chargers.

General Safety Precautions

Includes flash usage warnings and restrictions on indoor use for specific frequency bands.

SAR Certification Information

European RF Exposure Guidelines

Details compliance with Council of Europe (CE) guidelines for radio wave exposure.

FCC RF Exposure Guidelines

Details compliance with Federal Communications Commission (FCC) guidelines for radio wave exposure.

Legal and Compliance Notices

Declaration of Conformity

States product compliance with essential requirements of EU Directive 2014/53/EU.

FCC Compliance Notice

Details FCC rules compliance, including conditions for operation and interference.