Nokia X6 - Voice Commands; Accessory Settings

Select from the following:
Light sensor — Adjust the light sensor sensitivity of your device. The light sensor turns
the lights on when the lighting of your location is dim and off when it is bright.
Font size — Select the size of text and icons on the display.
Welcome note / logo — Select whether you want to display a note or image when
you switch on the device.
Light time-out — Set how long the light stays on when you stop using the device.
Voice commands
Activate voice commands
Press and hold the call key in the home screen, and say a command. The voice command
is the name of the application or profile displayed in the list.
To view the list of voice commands, select Menu > Settings and Phone > Voice
commands.
Select Options and from the following:
Change command — Edit the voice commands.
Playback — Listen to the synthesized voice tag.
Remove voice command — Remove a voice command that you added manually.
Settings — Adjust the settings.
Voice command tutorial — Open the tutorial for voice commands.
Accessory settings
Select Menu > Settings and Phone > Accessories.
Some accessory connectors indicate which type of accessory is connected to the device.
Select an accessory and from the following:
Default profile — Set the profile that you want activated each time you connect a
certain compatible accessory to your device.
Automatic answer — Set the device to answer an incoming call automatically after 5
seconds. If the ringing type is set to Beep once or Silent, automatic answer is disabled.
Lights — Set the lights to remain on after the time-out.
The available settings depend on the type of accessory.
To change the settings for a TV-out connection, select TV-Out and from the following:
Default profile — Set the profile that you want activated each time you connect a
Nokia Video Connectivity Cable to your device.
130 Settings
© 2009 Nokia. All rights reserved.130