Nolan N-Com B 601 X Series User Manual

19
12.1 Sharing music via Bluetooth (A2DP Sharing)
During the intercom connection, you can start playing music by briefly pressing the “” key for about 2
seconds. The music will be played in both systems.
Music sharing temporarily cuts off the intercom conversation; however, this can be automatically restored by
stopping the music (this is done by pressing the “” key for about 2 seconds).
N.B.
: Music shared through the intercom can be managed by both systems, for example, both systems can
change the track by pressing the relative command.
N.B.
: the “Music Sharing” function can be used with the N-Com series “900” / “600”.
13 SATELLITE NAVIGATOR FOR MOTORCYCLES
B601 system is compatible with the most common satellite navigators for motorcycles. For a list of compatible
models and additional details, visit the website www.n-com.it
To pair up a satellite navigator to the B601 system, follow the procedure illustrated in Chapter 10.
N.B.
: Intercom connection is automatically cut off every time the navigator gives directions and restored at the
end of the message from the navigator.
14 N-COM INTERCOM
The N-Com B601 system allows communication with other N-Com systems, up to a maximum distance of
about 150 m (in open field, with no obstacles). The range of the communication varies depending on the N-
Com systems used.
Important:
The procedure described below refers exclusively to the pairing up and operation between the
B601 and the “900” / “600” series N-Com systems.
To pair up to N-Com systems of a range other than the “900” / “600” series, please refer to the procedure
described in chapter 15 “Universal Intercom”.
N.B.
: The range and quality of the communication may vary significantly depending on the presence of
obstacles, weather conditions, magnetic fields.
14.1 N-Com “900” / “600” Series Intercom pairing up
• Make sure the systems are turned off.
• Put the systems in “Configuration” mode: press the “
n
” key and keep it pressed for 4 seconds, until you hear
the voice announcement “
Configuration Menu
”.
• On both systems, press the “” key until you reach the option “
Intercom pairing
”.
• On system A, press the key pertaining to the “pre-setting position” where you wish to save system B.
Pairing up CHANNEL 1
Briefly press “
n
”.
Pairing up CHANNEL 2
Press the “
n
” key twice.
Pairing up CHANNEL 3
Press the “
n
” key three times.
The Intercom connection with the selected channel is automatically activated at the end of the pair up
procedure.
14.2 N-Com “900” / “600” Series Intercom function (one-to-one connection)
To establish an Intercom connection with one of the systems stored in memory, simply press the command
related to the channel where the system was saved.

Nolan N-Com B 601 X Series Specifications

General

Brand	Nolan
Model	N-Com B 601 X Series
Category	Motorcycle Accessories
Language	English