Norac UC5 - Page 21


19


Theterminalwilltheninstructyoutoexitthecabandpulltheboom
tipdowntowardstheground,andthenreleasetheboom.
Ensure you stay a minimum of 3 feet (1m) away from any  of the
sensors.

Hold the check button and continue holding it until you are
instructedtoreleaseit.
Thesystemwillnowcalibratethehydraulics.Allboomsectionswill
move.
If you accidentally release the button, select and hold the check
buttontoresume.

When the setup is finished the terminal will instruct you to release
thechecktocompletetheautomaticsetup.
Your NORAC UC5™ system is now configured and ready for
operation.