Norac UC5 - Hydraulic Retune


21

3.8. HydraulicRetune
OnoccasionitisnecessarytorecalibratethehydraulicsoftheNORACUC5™BoomHeightControlsystem.
Whenyoupressthe retunebuttonfrom the setupscreen,thesystemwill gothrough onlythehydraulic
tuningportionoftheautomaticsetup.Youmaywanttoperforma
retunewhen:
 Ahydraulicsolenoidhasbeenchanged.
 Ahydraulicpumphasbeenchangedoradjusted.

Fromthesetupscreen,selectretune.

A list of precautions will be displayed on the terminal.It is very
importantthatyoureadtheseprecautionsandfollowthem.
Onceyouhavereadtheprecautions,selectthecheckbutton.