Norac UC5 - Page 52


50

5.7. ReplacingComponents
ReplacingaHeightorRollSensor,InputorValveModule
 PerformingaretuneorautomaticsetupisNOTnecessary.
 Turnoffthepower,replacethecomponentandturnonthepower.Thesystemwillrecognizethat
thereisanewcomponent.
ReplacingaControlModule
 Performinganewautomaticsetupisrequired.
SwappingHeightorRollSensorLocations
 Thesensorsneedtobereconfigured(mapped)tothenewlocations.

73.0 °F